Sony ZRCT-100, Installation Manual

Page: 69 / 171

2-35 (E)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
(5) Tighten the twelve screws. (Tightening torque: 3.0
?
0.3 N
.
m)
(6) Remove all eccentric pins (long) and hexagon wrenches.
7. Check that the specifications are met.
Specifications
.
Difference in surface level (Z direction): 0
?
40 μ m
.
LED pitch (X and Y directions): 1260
?
40 μ m
.
LED linearity (X and Y directions): 0
?
80 μ m
If the specifications are not met, align the display unit in the Z direction and X/Y directions again.
(Refer to steps 5 and 6.) Then, check that the specifications are met again.
8. Save the data on the monitor of the unit alignment tool. ([Data Save] button)
9. Stop the unit alignment tool ([Stop] button) and turn off the battery. Disconnect the two cords of the
unit alignment tool. You can disconnect whichever cords, USB cable or power cord, first.
t
The unit alignment tool can remain attached to the display unit until it is attached to the next display
unit.
10. Install the next display unit. Repeat steps 1 to 9.
For the installation of the first display unit in the row, refer to Section 2-4-4.
11. After assembling the nine display units, connect them to the back frame. (Refer to Section 2-5.)
2-4-6. External Dimensions and Installation Space of Unit Alignment Tool
[64.9]
[68] [70]
[64.9]
: Maximum external dimensions of unit alignment tool
403.2 (15.874”)
453.6 (17.858”)
454.6
25.8
[24.0]
[106.2]
533.0
120 172 to 240
: Distance from the outer shape of display unit
Unit: mm
[ ]
583.8
25.8 25.8 81.5
100
(3.937”)