6-49 (E)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
6-17-2. Settings
1. Display the Main screen.
2. On the menu bar, click [Array], and then click [3D Settings]. (The screen varies depending on the
Display Control Software version.)
The 3D Settings screen is displayed.
Screen example (The screen varies depending on the Display Control Software version.)
Version earlier than 1.22.0
Version 1.22.0 or later
3. Select a mode. For the details of the mode, refer to Section 6-17-1.
2D/3D
Frame
Sequence
mode:
In the version earlier than 1.22.0, leave the [3D Dual Input Mode]
check box cleared, then proceed to step 5. In the version 1.22.0 or later,
select [3D Frame Sequential Mode] in a pull-down menu, then proceed
to step 5.
3D Dual Input mode:
In the version earlier than 1.22.0, place a check mark in [3D Dual
Input Mode]. In the version 1.22.0 or later, select [3D Dual Input
Mode] in a pull-down menu.
n
If any of the following items is selected in [Input Select] on the Input Settings screen, [3D Dual Input
Mode] cannot be selected.
.
[DisplayPort (Single1)]
.
[DisplayPort (Single2)]
.
[HDMI1] (ZRCT-200 only)
.
[HDMI2] (ZRCT-200 only)
Summary of Contents for ZRCT-100
