Sony VPL BW7 - 3 LCD Digital Projector, Operating Instructions Manual

Page: 50 / 324

GB
50
• Be careful not to touch the glass surface
of the lamp.
• The power will not turn on if the lamp is
not secured properly.
• Do not allow any liquid or other objects
into the slot to avoid electrical shock or
fire.
6
Close the lamp cover and
tighten the screw.
Be sure to attach the lamp cover securely
as it was. If not, the projector cannot be
turned on.
7
Turn the projector back over.
8
Connect the power cord.
The ? / 1 switch lights in red.
9
Press the ? / 1 switch to turn the
projector on.
10
Press MENU, and select the SET
SETTING menu.
11
Select “Lamp Timer Reset”, and
press
.
12
Select “Execute” with
m
, and
press .
The Lamp Timer is initialized to 0, and
“Change the Lamp and clean the Filter?”
is displayed in the menu screen.
Refer to page 51 for “Cleaning the Air
Filter”.
13
Select “Yes” with M .
“Lamp Timer Reset Complete!” is
displayed in the menu screen.
Disposal of the used lamp
Lamp in this product contains mercury.
Disposal of these materials may be regulated
due to environmental considerations. For
disposal or recycling information, please
contact your local authorities or the
Electronic Industries Alliance
(www.eiae.org).
Notes
Note
SET SETTING Input-A
S m a r t A PA : O n
Au t o I n p u t S e a rch : O f f
I n p u t - A S i g n a l S e l . : Au t o
C o l o r S y s t e m :
Au t o
Pow e r S av i n g : O f f
C C D i s p l ay : O f f
L a m p T i m e r R e s e t
Change the Lamp and clean the Filter?
Yes: No: