27
The INPUT SETTING Menu/The SET SETTING Menu
The SET SETTING Menu
The SET SETTING menu is used for changing the
initial settings of the projector. Unadjustable items are
not displayed in the menu. (The following display
shows an example.)
SET SETTING
STATUS:
LANGUAGE:
INSTALLATION:
POWER SAVING:
SIRCS RECEIVER:
GROUP INDEX:
DEVICE INDEX:
1
1
C. BLACK:
O F F
ON
ENGLISH
1
OFF
FRONT&REAR
INPUT-A
STATUS
Sets up the on-screen display.
ON: Shows all of the on-screen displays.
OFF: Turns off the on-screen displays except for the
menus and warning messages.
LANGUAGE
Selects the language used in the menu and on-screen
displays.
Available languages are: English, French, German,
Italian, Spanish, Japanese and Chinese.
INSTALLATION
Reverses the picture horizontally or vertically. Select
the position to match the installation location.
1: Set to this position when the projector is placed in
front of the screen.
2: Reverses the picture vertically.
3: Reverses the picture horizontally.
4: Reverses the picture horizontally and vertically.
Note
When using a mirror, be careful during installation as
the picture may be reversed.
(continued)
Memory
Preset signal
fH
fV
Sync
Horizontal
No.
(kHz) (Hz)
size
39
1600
×
1200 UXGA VESA 60
75.00 60.00 H-pos V-pos
1689
40
UXGA VESA 65
81.91 65.53 H-pos V-pos
1689
41
UXGA VESA 75
93.75 75.00 H-pos V-pos
1689
43
480/60P (Progressive component) 31.47 60.00 S on G
1605
44
575/50P (Progressive component) 31.25 50.00 S on G
1616
45
1080/50
I
28.13 50.00 —
1852
47
720/60P
45.00 60.00 —
1736
48
720/50P
37.50 50.00 —
2084
49
1080/24PsF
27.00 48.00 —
1929
51
FILM/60P Pull-Down 60P (VIDEO) 15.73 59.94 H-neg V-neg
—
52
Pull-Down 60P (15k) 15.73 59.94 H-neg V-neg
—
