12
Location and Function of Controls
Rear
1
INPUT A connectors
RGB input connectors (R, G/G SYNC, B, SYNC/
HD, VD) (BNC type): Connect to the video
outputs of equipment such as a computer or a
video camera.
Note
The INPUT A connectors do not function when the
PC-3000 Signal Interface Switcher is connected.
2
Signal interface board attachment part
(INPUT B)
An optional signal interface board can be attached
according to your requirements. If you install the IFB-
12A interface board to this section and select the
output mode, you can output the signal input through
the INPUT A connectors.
For details on installing the interface boards, consult with
qualified Sony personnel.
3
Signal interface board attachment part
(INPUT C)
An optional signal interface board can be attached
according to your requirements.
Note
You cannot select the output mode when attaching the
IFB-12A interface board.
0
0
CONTOROL S
IN
PLIG IN POWER
STATUS/ERROR MESSAGE
OUT
STANDBY
1
ON
@
RS-
232C
RS-
422A
RS-232C/422A
PJ COM
IN
R
G/G SYNC
SYNC/HD
VD
B
OUT
TRIG
DEVICE INDEX
CONTOROL
6
7
8
9
0
qa
qs qd
qf
5
4
3
1
2
4
IFB-LE100 interface board attachment part
(INPUT D)
The optional IFB-LE100 interface board can be
attached.
5
Rear remote control (SIRCS) detector
6
ON indicator
Lights when the power is turned on.
The indicator flashes for about 15 minutes after the
power is turned off by pressing the STANDBY key, as
the fan runs to cool down the inside of the projector.
7
STANDBY
1
indicator
Lights to indicate that the projector is in standby mode.
8
STATUS/ERROR MESSAGE (message) display
window
Displays the signal status and error messages about the
input signals.
9
Lamp cover
The lamp is inside.
For the lamp replacement, consult with qualified Sony
personnel.
q;
Carrying handle
Pull up the handle when carrying the projector.
