31
Connection Examples
0
0
CONTOROL S
IN
PLIG IN POWER
STATUS/ERROR MESSAGE
OUT
STANDBY
1
ON
@
RS-
232C
RS-
422A
RS-232C/422A
PJ COM
IN
R
G/G SYNC
SYNC/HD
VD
B
OUT
TRIG
DEVICE INDEX
CONTOROL
STATUS/ERROR MESSAGE
IN
PLIG IN POWER
OUT
RS-
232C
RS-
422A
RS-232C/422A
PJ COM
IN
OUT
STANDBY
1
ON
@
0
0
CONTOROL S
TRIG
DEVICE INDEX
CONTOROL
:
OUT PUT
SW NO
RS-232C/422A
REMOTE
RS-232C
RS-422A
RS-485 IN
RS-485 OUT
Connecting the Switcher
Use the optional PC-3000 Signal Interface Switcher
for connecting various video equipment. The input can
be selected by pressing the SWITCHER/VIDEO
MEMORY/INDEX keys on the Remote Commander
or the SWITCHER keys on the control panel.
For selecting the input from the switcher, see pages 11 and
15.
Notes
• When you select the input from the switcher, be sure
to set the SWITCHER/VIDEO MEMORY/INDEX
select switch on the Remote Commander to the
SWITCHER position.
• When connecting the switcher, use the wired Remote
Commander. If you use the wireless Remote
Commander, activate the remote control detector on
only one unit of the equipment connected through the
PJ COM connector. To deactivate the remote control
detectors of this unit, set SIRCS RECEIVER in the
SET SETTING menu to OFF.
For details, see page 28.
• After all the connections are complete, attach the
terminator (supplied) to the PJ COM connector on
both the projector and switcher to which nothing is
connected.
Device index
number: 01
Rear
to INPUT A
SIC-10 connecting cable
(5BNC
y
5BNC)
(not supplied)
to OUTPUT
PC-3000 switcher
Computer, etc.
to PJ COM
IN
RCC-5G/10G/30G
connecting cable
(not supplied)
to PJ COM OUT
Attach the
supplied
terminator.
to a wall outlet
(200-240 V AC,
15 A or more)
AC power cord
(supplied)
to AC inlet (front)
Signal flow
VCR, etc.
Attach the
terminator
(supplied with
the PC-3000).
Connection e
xamples/Inde
x n
umber setting
