10
Location and Function of Controls
Control Panel
1
ON key
Press to turn on the power of the projector.
2
STANDBY key
Press to make the projector enter standby mode.
3
RGB keys
Adjust the picture.
APA (Auto Pixel Alignment): Adjusts the position
of the picture on the screen automatically so that
the picture is clearly visible when the signals are
input from a computer.
DOT PHASE: Adjusts the phase of the signal input
from a computer. After pressing this key, adjust
the position of the picture using the four arrow
keys so that the clearest picture is obtained.
SIZE: Enters the size adjustment mode for the input
signal. Adjust the horizontal size of the picture
using the arrow keys.
<
: to reduce horizontal size
,
: to expand horizontal size
SHIFT: Enters the shift adjustment mode for the
input signal. Adjust the position of the picture
using the four arrow keys. The picture shifts in the
direction of the arrow on the pressed key.
4
STATUS ON/OFF keys
Press OFF to eliminate the on-screen display.
Press ON to restore the on-screen display.
Note
The menus and warning messages appear even if the
OFF key is pressed.
5
LIGHT button
Illuminates the key indicators on the control panel and
the message display window on the rear panel when
the projector is turned on. If you do not press any key
on the control panel for more than 30 seconds, the
illumination turns off automatically. The illumination
also turns off if you press the LIGHT button again.
6
MUTING PIC (picture) key
Press to cut off the picture. Press again to restore the
picture.
7
PATTERN key
Displays a HATCH pattern on the screen for focus,
zoom, and shift adjustments. Press again to turn off the
HATCH pattern.
PIC
ON
OFF
PATTERN
FOCUS
ZOOM
SHIFT
MUTING
STATUS
LENS CONTROL
SIZE
DOT PHASE
APA
SHIFT
RGB
ON
STANDBY
MENU
INPUT SELECT
SWITCHER
A
D
B
C
BLKG
SYS SET
RESET
1
4
2
3
5
8
6
7
9
10
SW NO
ENTER
BRIGHT
CONTR
PICTURE CONTROL
HUE
COLOR
SHARP
LIGHT
1
2
3
4
5
6
qj
qh
qg
qf
qd
7
0
qs
8
9
qa
