Sony URX-P40 Operating Instructions Manual Download Page 9

Page: 9 / 56

• Channel configuration supported in combination with

the UWP-D series equipped with an infrared
communication function

• Output level control for receiver
• Equipped with output mode with wide range of output

level settings

• High visibility OLED display for indoor/outdoor use
• USB for power supply
• Digital audio interface support using SMAD-P5 multi-

interface shoe-mount adaptor (option)*

* For details on cameras that support this function, visit

the Sony website.

Name and Function of
Parts

Body-pack transmitter (UTX-B40)

Antenna

POWER indicator

Displays the battery level.

AUDIO (audio input level) indicator

Turns on or off according to the audio input level as
follows.

On (red):

Audio input level is too high. If the sound is

distorted, adjust the attenuation level to decrease the
audio input level

(page 41)

On (green):

Audio input level is appropriate.

Off:

There is no audio input or the input level is too low.

Flashing (orange):

Audio is muted (i.e., disabled).

Audio input connector (BMP type)

Connect to the supplied lavalier microphone.

• When the audio input level is set to MIC, a voltage for

the lavalier microphone power supply is applied to the
audio input connector. Special electrical wiring is used
inside the audio input connector for this purpose.

Indicator display

Status

On (green)

Sufficient battery level

Flashing (green)

Battery is getting low

Off

Supply OFF

Notes

Summary of Contents for URX-P40

























































Search results

Summary of Contents for URX-P40

Reviews:

Related manuals for URX-P40

Brands by name

Popular brands

Sony URX-P40, Operating Instructions Manual

Search results

Summary of Contents for URX-P40

Reviews:

Related manuals for URX-P40

Brands by name

Popular brands