Sony UP-DR200, Service Manual, Page: 13 / 102

1-7
UP-DR200
7. Remove the four screws, then remove the ribbon door
assembly in the direction of the arrow.
8. Remove the four hooks, then remove the inner cover
(front).
9. Attach the ribbon door assembly in the reverse order
of steps 1 to 8.
n
When attaching the paper eject guide cover, attach it
so that the discharging brush is placed under the
ribbon roller (CH).
BVTT3
x
6
BVTT3
x
6
BVTT3
x
6
Ribbon door
assembly
Inner cover
(front)
Hooks
Hooks
Discharging brush
Paper eject guide cover
Ribbon roller (CH)
1-6-2. Paper Door Assembly
1. Remove the top panel assembly.
(Refer to Section 1-4-1.)
2. Remove the side panel (R) assembly/side panel (L)
assembly. (Refer to Section 1-4-2.)
3. Remove the two snap rings (E3.0), then remove the
paper arm levers.
4. Remove the two snap rings (E5.0), then remove the
paper door shaft and two bearings (6).
5. Remove the paper door assembly.
6. Attach the paper door assembly in the reverse order of
steps 1 to 5.
E3.0
E5.0
E5.0
E3.0
Paper arm lever
Paper arm lever
Bearing (6)
Bearing (6)
Paper door
shaft
Paper door assembly