Section 8
Setup Menu
8-1.
Overview of Setup Menu
Some of adjustments given in this section use the setup menu. The setup menu consists of the following menus.
Besides there is a TOP menu indicating the entire configuration of menu items.
• USER menu
• USER MENU CUSTOMIZE menu
• OPERATION menu
• PAINT menu
• MAINTENANCE menu
• FILE menu
• DIAGNOSIS menu
• SERVICE menu
In this section, describes the setup menu operation as follows.
For example: When AUTO LEVEL in AUTO SETUP page of MAINTENANCE menu is performed:
MENU: MAINTENANCE
PAGE: AUTO SETUP
ITEM: AUTO LEVEL
8-1-1.
How to Display the SERVICE Menu/ How to Change the Setting Values
How to Display the SERVICE Menu
Set the DISPLAY switch to “MENU” while pressing the ASSIGNABLE 1 switch and the rotary encoder.
How to Change the Setting Values
To enter or cancel the setting value of items, which can be changed by turning the rotary encoder, proceed as follows.
To enter the setting value: Press the rotary encoder.
Pressing the STATUS/CANCEL switch toward the “CANCEL” side, it is returned to the data before adjustment.
After the setting value is entered, the setting cannot be canceled.
8-1-2.
Settable Special Functions
The following functions are made available by settings in the SERVICE menu. Note that they are limited functions.
In addition, settings of the number of scene files and setting of the resume of filter position are available.
Refer to the description in
.
When an Auto Focus Lens is Used
When an auto focus lens of Fujinon or Canon is used, a focal area marker and a focusing indicator can be displayed on
the viewfinder.
Note
However, there are the following restrictions.
• When AF DISPLAY is set to ON, the EFFECT display cannot be used. Instead of the EFFECT display, you can
select 100% of the SAFETY ZONE display that usually cannot be selected.
• If “Digital extender” is used, the area marker is not displayed correctly.
HDC4300
8-1
