How to Change the Setting Values
There are menu items that can be changed setup value by turning the rotary encoder.
The setup value is changed, confirmed or cancelled by following method.
Change: Turn the rotary encoder.
Confirm: Press the rotary encoder.
Cancel: Switch the STATUS/CANCEL to "CANCEL”. Before confirming, value can be returned to previous.
5-1-5.
Connection of Equipment
Lens
(For ENG/EFP)
Viewfinder
HDVF-20A/200/C30WR/C35W
CCA-5 cable
(max. 200 m)
SDI MONI
Waveform monitor
Color monitor
Master setup unit
MSU-1000/1500
75 Ω
A-ch
Y, Pb, Pr
R, G, B
HDC4300
5-1-6.
Initial Settings
There are following Initial Settings.
• Set using the MSU.
• Set using setup menu and switches of the camera.
or later, perform the initial setting.
When Adjusting Using the MSU
Set each button as follows.
• Power supply and signal switching block
- ALL button → OFF (dark)
- CAM PW button → ON (lit)
- VF PW button → ON (lit)
- TEST 1 button → OFF (dark)
- TEST 2 button → OFF (dark)
- BARS button → OFF (dark)
- CLOSE button → ON (lit)
HDC4300
5-5