OHB MATRIX
<OHB MATRIX>
S08 TOP
PHASE : 00 ALL CLEAR
HUE : 00
SAT : 00
STORE FILE: EXEC
MATRIX : OFF
PRESET : --
: --
USER MATRIX : --
MULTI MATRIX: --
The OHB MATRIX menu is used for adjustment of the OHB matrix. Use this menu only when it is necessary to adjust
subtle differences in color reproduction between CMOS blocks.
INTERCOM
<INTERCOM>
S09 TOP
INTERCOM2 INTERFACE : (4WIRE)
INTERCOM2 INTERFACE : (ENABLE)
DISP INTERCOM1 ONLY : OFF
INTERCOM2 INTERFACE
Specifies the interface(level) of microphone that connect the INTERCOM2 connector.
RTS : Intercom level of RTS company
CLEARCOM: Intercom level of Clear-Com an HME company
Note
The setting is valid when S3 switch is set to RTS side on the SY-408 board.
INTERCOM2 VR
When using intercom of RTS company or Clear-Com an HME company, set the INTERCOM2 volume on the rear panel
to valid or invalid. (default : invalid)
Note
The setting is valid when S3 switch is set to RTS side on the SY-408 board.
DISP INTERCOM1 ONLY
When selecting INTERCOM2 switch on the rear panel to MIC ON, set indication/ non-indication of "TALK" in the
viewfinder.
ON : non-indication
OFF : indication
HDC4300
8-7
