7-2.
Operator File
The operator file can be stored and read in the camera.
Use the setup menu to store the operator file in and read the operator file from the USB memory.
Note
• Operator file data stored in the USB drive cannot be read when the power is just turned ON.
• The current operator file data is retained even when the power is turned off.
7-2-1.
Operator File Operation
Outline Figure of Operation
Current Operator
File Data
Output to hardware
USB drive
Camera unit
Storing
(Step 1)
Reading
(Step 2)
Preset Operator
File
Preset Operator File
Factory-set
value
Storing
Reference: Refer to step 1 of “Outline Figure of Operation”.
Using OPERATION Menu of This Unit
Stores the current status in the USB drive.
[OPERATION] → [OPERATOR FILE] → [WRITE (CAM → USB)]
Reading
Reference: Refer to step 2 of “Outline Figure of Operation”.
Using OPERATION Menu of This Unit
Reads the operator file stored in the USB drive to the camera.
[OPERATION] → [OPERATOR FILE] → [READ (USB → CAM)]
HDC4300
7-3
