Sony STR-DA5400ES, Operating Instructions Manual

Page: 18 / 322

18 GB
Name Function
A
AV ? / 1 (on/
standby)
Press to turn on or off the audio/
video components that the
remote is assigned to operate
(page 135).
If you press
? / 1 ( 2 ) button at
the same time, it will turn off
the receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ? / 1
switch changes automatically
each time you press the input
button (
5 ).
B
? / 1 (on/
standby)
Press to turn the receiver on or
off.
If zone 2 or zone 3 is selected,
only the main receiver is turned
on or off with this button. To
turn off all components
including an amplifier in zone 2
or zone 3, press
?
/
1
and AV
?
/
1 ( 1 ) at the same time
(SYSTEM STANDBY).
Saving the power in
standby mode.
When “Control for HDMI”
(page 125) and “RS-232C
Control” (page 126) are set to
“OFF.”
C
ZONE Press to switch the zone 2 or
zone 3 operation (page 89).
D
AMP Press to enable the receiver
operation (page 45).
E
Input
buttons Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components (page 58). You can
program the remote to control
non-Sony components
following the steps in
“Programming the remote”
(page 135).
F
TV INPUT Press TV (
wf
), then press TV
INPUT to select the input signal
of a TV.
G
WIDE Press TV ( wf ), then press
WIDE repeatedly to select the
wide picture mode.
H
D.TUNING Press SHIFT (
wg
), then press to
enter direct tuning mode
(page 66, 73).
I
CLEAR Press SHIFT (
wg
), then press to
– clear a mistake when you
press the incorrect numeric
button.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
J
ENT/MEM Press SHIFT (
wg
), then press
ENT/MEM to enter the value
after selecting a channel, disc,
or track using the numeric
buttons, or to store a station
during tuner operation.
K
MOVIE Press to select sound field for
movies (page 85).
L
MUSIC Press to select sound field for
music (page 83).
M
NIGHT
MODE Press AMP ( 4 ), then press
NIGHT MODE to activate the
NIGHT MODE function
(page 106).
N
HDMI
OUTPUT Press to select output signal to
the component connected to the
HDMI OUT jacks (page 35).
O
GUI MODE Press to switch the display
mode of the menu between GUI
MODE (to display the menu on
the TV screen) and DISPLAY
MODE (to display the menu in
the display window).
P
V/v/B/b
Press V / v / B / b to select the
menu items. Then press to
enter the selection.
Q
OPTIONS
TOOLS Press to display and select items
from option menus for receiver,
DVD player, TV, or Blu-ray
Disc Player, etc.
R
MENU
HOME Press to display the menu used
to operate audio/video
components or a TV.
Name Function