Sony STR-DA5400ES, Operating Instructions Manual

Page: 96 / 322

96 GB
Operating the receiver
from another zone
(ZONE 2/ZONE 3 operations)
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2 or zone 3. When an IR
repeater is not connected, use this receiver in
the main zone.
1
Turn on the main receiver (this
receiver).
2
In the case of illustration 1-
2
(page 90), turn on the amplifier
in zone 2.
3
Press ZONE.
The remote switches to zone 2.
4
Press ? / 1 .
The zone function is activated.
5
Press MENU.
The menu is displayed on the TV screen.
6
Press V / v to select “ Input,”
then press or b .
7
Press V / v to select the input
source you want, then press
.
For zone 2, analog video and audio
signals are output. When you select
SOURCE, the signals of the current input
of the main zone are output to the ZONE
2 OUT jack.
8
Adjust to a suitable volume.
• In the case of illustration 1-
1
(page 90), adjust the volume using
MASTER VOL +/– on the remote.
• In the case of illustration 1-
2
(page 90), adjust the volume using the
receiver in zone 2.
To finish the zone 2 operation
Press ? / 1 after pressing ZONE.
ZONE
V / v / b ,
MENU
? / 1
MASTER
VOL
Input
buttons
Operating the receiver from
zone 2