manualshive.com logo in svg

Sony StorStation FSV-M3, User Manual

Share
Download
Sony StorStation FSV-M3 User Manual Download Page 71

71

  Appendix

Appendix

Precautions

Please observe the following precautions when using the equipment.

• It is not possible to install any software into the equipment other than software 

supplied by Sony specifically for use with the equipment.

• Do not connect the server directly to the Internet, as illegal access may result. 

Take adequate care regarding the way the system is set up.

• Sony does not accept any liability for loss of user data resulting from 

equipment malfunction or user operations.

Troubleshooting

Before contacting a Sony Technical Center, please check the following items. 
Contact the Sony Support Center if the problem persists.

The server does not work.

• Verify that the power switch is turned on.
• Verify that the power cable is connected correctly.
• Turn off the server by pressing the power switch. Restart the server.
• During the startup procedure, the server checks the file system. The length of 

this check varies depending on the amount of data on the server (in some 
extreme case, it can take as long as two hours).

The server cannot be accessed from a browser

• Verify whether the network cable is connected correctly.
• Verify whether the LINK LED and ACT LED are lit.
• Verify whether the IP address entered on the browser is correct. The current 

IP address can be checked from FSV-Central for M3.

• Verify whether any other devices are using the same IP address as the server.
• Verify the network cable with other computers to make sure it is not faulty.
• Verify whether there is a problem with the connection between the network 

hub and the computer or server, or the hub connectors.

Summary of Contents for StorStation FSV-M3















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands