Sony SSC-SD26P, Operating Instructions Manual, Page: 8 / 40

Op
er
at
ion I
n
s
truc
tio
ns
Scan function
8
When the scan range has been set
The camera will scan at 45° increments within the scan
range until a command from the keypad controller is
received (e.g., horizontal rotate, vertical rotate, iris,
focus, etc). Refer to the diagram below.
Random Scanning
Random scanning can be configured to run at startup, or
can be controlled by the keypad controller (for details,
see the table on Page 26). Configuring the zoom level
and tilt angle is the same as in auto scanning.
When the scan range has not been set
The camera will randomly pick a stop point and perform
scanning until a command from the keypad controller is
receivied (e.g., horizontal rotate, vertical rotate, iris,
focus, etc). Refer to the diagram below.
When the scan range has been set
The camera will randomly pick a stop point and perform
scanning in the set range until a command from the
keypad controller is receivied (e.g., horizontal rotate,
vertical rotate, iris, focus, etc). Refer to the diagram
below.
Note
Please use the menu command <PAN/TILT SETUP>
stop time (p0) to configure the stop time (5 sec to
120 sec).
STOP
STOP
STOP
STOP
45
STOP
STOP
STOP
A
D B
C
left limit
right limit
E
A -->B-->C-->B-->A-->D-->E-->D
A B C D E F G H
right limit left limit