Sony SSC-SD26P, Operating Instructions Manual, Page: 19 / 40

Op
er
at
ion I
n
s
truc
tio
ns
Other menus
19
5
Press the
OPEN
key to confirm, or press
CLOSE
to cancel selection and exit from the menu screen.
SCHEDULE
Main menu
→
<OTHERS> menu
→
<SCHEDULE> menu
Four sets of schedules can be configured with individual
start time, end time, and action mode. The actions
include auto scan, tour, frame scan, and random scan
modes.
Tips
The Start and End time setup is based on unit hours. For
example, setting 0
→
1 means from 00:00 to 2 hours.
Set the SCHEDULE mode
1
Press “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <OTHERS>, and then press the
OPEN key to enter the <OTHERS> menu.
3
Move the cursor to <SCHEDULE>, and then press
the
OPEN key to enter.
4
Move the cursor to WEEK, press the OPEN key to
enter and move the joystick up/down to select the
week. Then press the
CLOSE key to confirm and
quit the menu.
5
Move the cursor to START, press OPEN to enter
and move the joystick up/down to select ON or
OFF.
6
Press the OPEN key to enter the start time, end
time and status settings for each group.
7
Move the joystick up/down/left/right to select the
desired settings.
8
Press the
OPEN
key to confirm, or press
CLOSE
to cancel selection and exit from the menu screen.
MOTION DETECTION
Main menu
→
<OTHERS> menu
→
<MOTION DETECTION> menu
The detection mode can be set:
MOTION can be set to ON or OFF.
The motion detection range can be set with the
MOTION AREA item.
The LEVEL item can be set to HI, MID or LOW.
The INTERVAL TIME item can be set between
1 ~ 255 sec
1
Press “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <OTHERS>, and then press the
OPEN key to enter the <OTHERS> menu.
3
Move the cursor to <MOTION DETECTION>, and
then press the
OPEN key to enter.
4
Move the joystick up/down to choose the desired
option, and move left/right to set ON, OFF or the
desired value.
5
Press the OPEN key to confirm, or press CLOSE
to cancel selection and exit from the menu screen.
Tips
For the MOTION AREA setting, refer to the PRIVACY
ZONE setting.
<CAMERA SETUP>
<PAN/TILT SETUP>
<CAMERA TITLE>
<PRESET SETUP>
<OTHERS>
<SYSTEM>
EXIT
FREEZE ACTIVITY OFF
SCAN TILE ANGLE 30 °
<SCHEDULE>
<MOTION DETECTION>
BACK
WEEK Mon.
ENABLE OFF
START END ACTION
1 00:00 00:00 N/A
2 00:00 00:00 N/A
3 00:00 00:00 N/A
4 00:00 00:00 N/A
BACK
<CAMERA SETUP>
<PAN/TILT SETUP>
<CAMERA TITLE>
<PRESET SETUP>
<OTHERS>
<SYSTEM>
EXIT
FREEZE ACTIVITY OFF
SCAN TILE ANGLE 30 °
<SCHEDULE>
<MOTION DETECTION>
BACK
MOTION OFF
<MOTION AREA>
LEVEL LOW
INTERVAL TIME 1s
BACK