Sony SSC-SD26P, Operating Instructions Manual, Page: 12 / 40

Op
er
at
ion I
n
s
truc
tio
ns
Camera Settings
12
PRIVACY ZONE
This feature can enable the user to black out (or white
out) a specifi c portion of the screen to protect the
necessary privacy. The size and position of these frame
areas can be adjusted according to the horizontal pan,
vertical tilt, and lens zoom of the camera. Up to 24 frame
zones can be configured.
Main menu
→
<CAMERA SETUP> menu
Set Privacy Zone number
1
Press “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <CAMERA SETUP>, and then
press the
OPEN key to enter the <CAMERA
SETUP> menu.
3
Move the cursor to PRIVACY ZONE, and then
press the
OPEN key to enter privacy zone
selection.
4
Move the joystick up/down to set P1-P24 ON/OFF.
5
Press the OPEN key to confirm, or press CLOSE
to cancel selection and exit from the menu screen.
Set Privacy Zone Size and Position (using
the keypad controller)
1
First move the image to be masked to the center of
the screen.
2
Press number key “83” then press and hold the
PRESET key for 2 seconds to go to the setup
screen for the zone number.
Screen display: PRIVACY ZONE 1
Move the joystick up/down to select the zone
number to set.
3
Press the OPEN to confirm selection, and then go
to the setup screen for the zone size:
Screen display: PRIVACY ZONE SIZE
Move the joystick up/down to set the zone size.
4
Press the
OPEN
to key to confirm the zone size,
and then go to the setup screen for the zone color:
Screen display: PRIVACY ZONE COLOR
Move the joystick up/down to select the zone color
(black or white).
5
Press the
OPEN
key to confirm the zone color and
then go to the next zone setting screen, or press the
CLOSE
key to exit the privacy zone setup mode.
Note
• Up to 24 zones can be setup, but the screen can
simultaneously display 8 zones.
• It is recommended to set the privacy zone slightly
larger than the actual area, to ensure that privacy area
is not revealed during movement.
• Privacy zone will zoom with the lens zoom level to
ensure the effect.
ALARM ACTION
There are a set of alarm ports under the camera including
6 alarm inputs and 1 alarm output. Each alarm can be
configured with 209 preset action points, and when
alarm 1 ~ 6 is triggered, the camera will immediately
move to the predefined position.
DETECT TIM: can be set to OFF, 2 seconds, 5 seconds,
10 seconds.
DELAY TIME: the alarm endurance time can be
decided by DELAY TIME (5 ~ 120 seconds).
Main menu
→
<CAMERA SETUP> menu
→
<ALARM ACTIONS> menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<CAMERA TITLE>
<PRESET SETUP>
<OTHERS>
<SYSTEM>
EXIT
<FOCUS>
WB
<AE>
ZOOM LIMIT
ZOOM SPEED
SHARPNESS
<SYNC LOCK>
PRIVACY ZONE
<ALARM ACTIONS>
BACK
ATW
x 2 6
5
1 0
P 1 OFF
<CAMERA SETUP>
<PAN/TILT SETUP>
<CAMERA TITLE>
<PRESET SETUP>
<OTHERS>
<SYSTEM>
EXIT
<FOCUS>
WB
<AE>
ZOOM LIMIT
ZOOM SPEED
SHARPNESS
<SYNC LOCK>
PRIVACY ZONE
<ALARM ACTIONS>
BACK
ATW
x 2 6
5
1 0
P 1 OFF
INPUT NO. ACTION OUT
1 OFF OFF
2 OFF OFF
3 OFF OFF
4 OFF OFF
5 OFF OFF
6 OFF OFF
MOTION OFF OFF
DETECT TIME OFF
DELAY TIME 5s
BACK