Sony SSC-SD26P, Operating Instructions Manual, Page: 22 / 40

Op
er
at
ion I
n
s
truc
tio
ns
RECORDING TOUR
22
5
Press the
OPEN
key to confirm, or press
CLOSE
to cancel selection and exit from the menu screen.
ACTION
It can be set to resume the previous action (AUTO
RETURN) or return to the preset point 1 (PARK) when
the alarm is disabled.
Set ACTION
1
Press “95,” and then hold the
PRESET
key for
2 seconds to enter the main menu screen.
2
Move the cursor to <SYSTEM>, and then press the
OPEN
key to enter the <SYSTEM> menu.
3
Move the cursor to ACTION, and then press the
OPEN
key to enter.
4
Move the joystick up/down to choose the desired
action mode.
5
Press the
OPEN
key to confirm, or press
CLOSE
to cancel selection and exit from the menu screen.
RECORDING TOUR
This camera provides 4 sets of patterns and playback
modes to select from. Actions for playback include lens
zoom, horizontal pan, and vertical tilt, etc. Once the
pattern is recorded, it can be played back accordingly to
the user’s discretion. Each set can record up to
6 minutes, and up to 4 sets (24 minutes) of patterns can
be recorded.
Recording tour configuration
1
Record:
Press “101,” and then hold the
PRESET key for
2 seconds Begin the first set
Press “102,” and then hold the
PRESET key for
2 seconds Begin the second set
Press “103,” and then hold the
PRESET key for
2 seconds Begin the third set
Press “104,” and then hold the
PRESET key for
2 seconds Begin the fourth set
2
Stop recording: Press “105” + PRESET key
3
Playback:
Press “101,” and then hold the
PRESET key for
2 seconds Begin the first set
Press “102,” and then hold the
PRESET key for
2 seconds Begin the second set
Press “103,” and then hold the
PRESET key for
2 seconds Begin the third set
Press “104,” and then hold the
PRESET key for
2 seconds Begin the fourth set
Note
When you are recording a pattern, the OSD cannot be
accessed to modify an action, while the pattern path
cannot be recorded again.