Sony SSC-SD26P, Operating Instructions Manual, Page: 21 / 40

Op
er
at
ion I
n
s
truc
tio
ns
SYSTEM
21
TOUR:
The camera will run TOUR 1.
DEFAULT:
The camera will move to the factory set
position.
Main menu
→
<SYSTEM> menu
Set the POWER UP mode
1
Press “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <SYSTEM>, and then press the
OPEN key to enter the <SYSTEM> menu.
3
Move the cursor to the POWER UP item, and then
press the
OPEN key to enter.
4
Move the joystick up/down to choose the POWER
UP mode.
5
Press the OPEN key to confirm, or press CLOSE
to cancel selection and exit from the menu screen.
LOAD FACTORY DEFAULT
Main menu
→
<SYSTEM> menu
Load the Factory Default
1
Press “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <SYSTEM>, and then press the
OPEN key to enter the <SYSTEM> menu.
3
Move the cursor to LOAD FACTORY DEFAULT,
and then press the
OPEN key twice to show the
screen:
* LOAD FACTORY DEFAULT setting is finished
Note
Do not operate the keypad controller after * is shown.
Perform camera operations after the arrow is shown.
E-FLIP
Set as E-Flip
1
Press “95,” and then hold the
PRESET
key for
2 seconds to enter the main menu screen.
2
Move the cursor to <SYSTEM>, and then press the
OPEN
key to enter the <SYSTEM> menu.
3
Move the cursor to E-FLIP, and then press the
OPEN
key to enter.
4
Move the joystick up/down to choose ON or OFF.
5
Press the
OPEN
key to confirm, or press
CLOSE
to cancel selection and exit from the menu screen.
MIRROR
Set Mirror mode
1
Press “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <SYSTEM>, and then press the
OPEN key to enter the <SYSTEM> menu.
3
Move the cursor to the MIRROR item, and then
press the
OPEN key to enter.
4
Move the joystick up/down to choose ON or OFF.
5
Press the OPEN key to confirm, or press CLOSE
to cancel selection and exit from the menu screen.
LANGUAGE
The display language can be switched to different
languages according to the requirement of users.
1
Press “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <SYSTEM>, and then press the
OPEN key to enter the <SYSTEM> menu.
3
Move the cursor to LANGUAGE, and then press
the
OPEN key to enter.
4
Move the joystick up/down to select the desired
language.
<CAMERA SETUP>
<PAN/TILT SETUP>
<CAMERA TITLE>
<PRESET SETUP>
<OTHERS>
<SYSTEM>
EXIT
WEEK
Mon.
TIME 15:15:15
<PASSWORD>
POWER UP BY DEFAULT
LOAD FACTORY DEFAULT
E-FLIP OFF
MIRROR OFF
LANGUAGE ENGLISH
ACTION AUTO RETURN
BACK
<CAMERA SETUP>
<PAN/TILT SETUP>
<CAMERA TITLE>
<PRESET SETUP>
<OTHERS>
<SYSTEM>
EXIT
WEEK
Mon.
TIME 15:15:15
<PASSWORD>
POWER UP BY DEFAULT
LOAD FACTORY DEFAULT
E-FLIP OFF
MIRROR OFF
LANGUAGE ENGLISH
ACTION AUTO RETURN
BACK