Sony SSC-SD26P, Operating Instructions Manual, Page: 15 / 40

Op
er
at
ion I
n
s
truc
tio
ns
Horizontal Pan/Vertical Tilt Setup
15
RECOVER TIME
In scan mode (auto, frame, random), if tour and
recording tour are interrupted by inadvertent keypad
controller input, the camera will resume the previous
action after a set amount of time. The recovery time can
be set between 1 to 60 min, or disabled (set to OFF).
Set the Recovery Time
1
Enter “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <PAN/TILT SETUP>, and then
press the
OPEN key to enter the <PAN/TILT
SETUP> menu.
3
Move the cursor to RECOVER TIME, and then
press the
OPEN key to enter.
4
Move the joystick up/down to set the time.
5
Press the OPEN key to confirm, or press CLOSE
to cancel selection and exit from the menu screen.
SCAN SPEED
The scan speed of auto scan, random scan and frame
scan can be set to a value between 1° ~ 90°/s, but cannot
be set to a value that exceeds MAX SPEED.
Set the scan speed
1
Press “95,” and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <PAN/TILT SETUP>, and then
press the
OPEN key to enter the <PAN/TILT
SETUP> menu.
3
Move the cursor to SCAN SPEED, and then press
the
OPEN key to enter.
4
Move the joystick up/down to set the speed.
5
Press the OPEN key to confirm, or press CLOSE
to cancel selection and exit from the menu screen.
STOP TIME
In random, frame, or auto scan modes, STOP TIME can
be set. During scanning, the camera will pause at each
stop position from 5 sec to 120 sec.
Set the Stop Time
1
Enter “95,” and then hold the
PRESET
key for
2 seconds to enter the main menu screen.
2
Move the cursor to <PAN/TILT SETUP>, and then
press the
OPEN
key to enter the <PAN/TILT
SETUP> menu.
3
Move the cursor to the STOP TIME item, and then
press the
OPEN
key to enter.
4
Move the joystick up/down to choose the desired
preset position, move left/right to set the time.
5
Press the
OPEN
key to confirm, or press
CLOSE
to cancel selection and exit from the menu screen.
MAX SPEED
The max speed for horizontal pan/vertical tilt can be set
between 30° and 430° /sec.
Set the Max Speed
1
Press “95,” and then hold the
PRESET
key for
2 seconds to enter the main menu screen.
2
Move the cursor to <PAN/TILT SETUP>, and then
press the
OPEN
key to enter the <PAN/TILT
SETUP> menu.
3
Move the cursor to MAX SPEED, and then press
the
OPEN
key to enter.
4
Move the joystick up/down to set the speed.
5
Press the
OPEN
key to confirm, or press
CLOSE
to cancel selection and exit from the menu screen.
TOUR
For convenience of key press controls, the unit provides
4 sets of preset group configurations.
TOUR1
Press “70” and the PRESET key to run TOUR 1.
TOUR2
Press “77” and the
PRESET
key to run TOUR 2.
TOUR3
Press “78” and the PRESET key to run TOUR 3.
TOUR4
Press “79” and the
PRESET
key to run TOUR 4.