16-5
16-3 Connecting to the SIR-1000W
1
Turn OFF the main power to the SIR-1000W.
2
Remove the cover for the OPTION SLOT 2 of the rear panel of the SIR-1000W by
loosing two +3
×
20 screws, then insert the supplied connection board in the OPTION
SLOT 2 and tight two +3
×
20 screws.
3
Use the expansion cable (supplied) to connect the EXPANSION OUT connector of the
connection board mounted in the rear of the SIR-1000W and the EXPANSION IN
connector of the SCX-16W.
4
Turn ON the SIR-1000W’s power.
5
Using the supplied combining frames (four in all for the front, rear, left and right) to
attach the SIR-1000W and SCX-16W facilitates carrying and fixing to a base.
!
CAUTION
•
When using the SIR-1000W with an external DC power supply of less than 15 V, be
sure to supply power directly from the same power supply to the SCX-16W. Note that
when using the SIR-1000W with an AC power supply, the battery pack or an external
DC power supply of 15 V or more, power is supplied to the SCX-16W via the
recorder.
•
The expansion extension cable (SDK-10: sold separately) cannot be used.
Using the Combining Frames
Before use
To attach combining frames, use 12 hexagonal socket head bolts (4
×
16) on th e front, rear,
left and right sides of the SIR-1000W and SCX-16W. These bolts also attach the left and
right side frames of the SIR-1000W and SCX-16W, so do not attach or remove the
combining frame all at once, but one side at a time in order.
Items used
•
Combining frames (all the same shape) : 4
•
Hexagonal socket head bolts (4
×
16)
: 12
•
Allen wrench
: 1
