40
Projector
Ch
apt
er 1 U
s
e
r G
u
id
e
Projector
Basic control of selected Projector system functions are
available from the Projectionist Terminal. In the
SRX-R320 based system, reference to the “Projector”
includes only the projector portion of the Auditorium Unit.
When the Projector is in STANDBY various subsystems
of the auditorium unit are still operational. To Shutdown
the Auditorium Unit refer to
.
When the Projector is in STANDBY mode the system
remains active and accessible via either the Projectionist
Terminal or the SMS Controller application. When the
Auditorium Unit has been Shutdown you must execute a
Power ON sequence which is described in
The Projector menu
selection allows you to
access information and
control functions for the
following items.
• Projector Control
• Function Setup
• Projection Type
• Adjustment
• Ghostbuster
• Remote Update
To access Projector
menus, tap
Menu
and
then tap
Projector
. The
Projector Menus
appear.
From PROJECTOR CONTROL you can place the
Projector system in STANDBY, return it to ON
(operational mode), turn off the LAMP, DOUSE the image
output, recall a preset configuration, and adjust the
Luminance Offset applied to the current presentation from
the Digital Cinema projection system.
From FUNCTION SETUP you can modify a limited
number of projector settings; Lamp Power, Zoom, Focus
and Electrical V Shift, and save these new settings to the
Current Function.
From Projection Type you designate whether the projector
is configure for 2D or 3D presentation.
From Adjustments you perform projector alignment
operations.
From Ghostbuster, you can check whether the Ghostbuster
function is ON/OFF.
Projector Control
The PROJECTOR
CONTROL pane
contains basic controls in
addition to Current
Function select and the
Luminance Offset
control. To access
Projector Controls, tap
Menu,
tap
Projector
and
then tap
Projector
Control
. The
PROJECTOR
CONTROL pane
appears.
Changes made on the
PROJECTOR CONTROL pane effects as soon as the
selection is made.
DO NOT REMOVE AC-MAINS POWER TO SHUT
DOWN THE SYSTEM OR SET THE PROJECTOR
BREAKER TO OFF AS LAMP COOLING WILL BE
LOST AND THE RISK OF LAMP FAILURE IS
INCREASED.
The following table provides a guide to the possible
Projector State/State transition possibilities.
Note
Tap Menu
Tap Projector
Projector Menu
Note
Caution
Current Mode
Transition
New Mode
STANDBY
OK
ON
NO
LAMP OFF
ON
OK
STANDBY
OK
LAMP OFF
LAMP OFF
OK
STANDBY
OK
ON
Tap Projector Control
Projector Menu
POWER Group
(Projector) ON
(Lamp) ON
STANDBY
LAMP OFF
LAMP ON
3D Function
Summary of Contents for Screen Management System
Page 81: ...Sony Corporation ...
