1-5
20
Controlling the volume of your AV
amplifier (receiver) with the remote
1
Slide the TV/DVD switch to DVD.
2
Hold down
[
/
1
, and enter the
manufacturer code (see the table below)
for your AV amplifier (receiver) using the
number buttons.
3
Release
[
/
1
.
The
2
(volume) +/– buttons control the AV
amplifier’s volume.
If you want to control the TV’s volume, slide
the TV/DVD switch to TV.
z
Hint
If you want to control the TV’s volume even when the
TV/DVD switch is set to DVD, repeat the steps above
and enter the code number 90 (default).
Code numbers of controllable AV amplifiers
(receivers)
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your AV amplifier (receiver).
If you have a Sony DVD player or
more than one Sony DVD recorder
If the supplied remote interferes with your other
Sony DVD recorder or player, set the command
mode number for this recorder and the supplied
remote to one that differs from the other Sony
DVD recorder or player.
The default command mode setting for this
recorder and the supplied remote is “MODE3.”
1
Turn off the recorder.
2
Press down
x
(stop) on the recorder until
“MODE” appears in the front panel
display.
3
While keeping
x
(stop) pressed,
repeatedly press
.
/
>
on the
recorder to select the command mode
(MODE1, 2, or 3).
4
Slide the COMMAND MODE switch on the
remote so it matches the mode you
selected above.
Manufacturer
Code number
Sony
78, 79, 80, 91
Denon
84, 85, 86
Kenwood
92, 93
Onkyo
81, 82, 83
Pioneer
99
Sansui
87
Technics
97, 98
Yamaha
94, 95, 96
TV/DVD
switch
"
/
1
2
+/–
Number
buttons
1
2
3
4
5
6
7
8
9
0
x
.
/
>
COMMAND
MODE switch
Front panel display
21
Ho
o
ku
p
s and
Se
tti
n
gs
Step 7: Initial Setup
Use the Setup Displays to make the initial settings
for using the recorder. Complete the initial setup
in the following order.
Follow the steps from “Presetting channels” to
“Additional settings” below.
Presetting channels
1
Turn on the TV.
2
Press
[
/
1
.
3
Switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
4
Press SET UP.
The Setup Display appears, which allows you
to make adjustments to the recorder. For
details about the Setup Display, see page 69.
5
Press ENTER while [Start] is selected.
The recorder automatically starts searching
for all of the receivable channels and presets
them.
To manually set, disable, or fine-tune the
channels, see “[Channel Settings]” in
[Settings] Setup (page 70).
6
Press
<
to return to the Setup Display,
and follow the steps of “Selecting a
language for the on-screen display” (see
below).
If you do not want to change the on-screen
display language, go to “Setting the clock”
(page 22).
Selecting a language for the on-
screen display
1
Press
M
/
m
to select
[Language]
(language), and press
,
.
[Language] Setup appears.
2
Press
M
/
m
to select [OSD] (on-screen
display), and press
,
.
m
m
m
OSD Language Setup
Tuner and Channel Setup
Clock Setup
TV Type Setup
m
Audio and Video connection Setup (if necessary)
1
2
3
4
5
6
7
8
9
0
"
/
1
<
/
M
/
m
/
,
,
ENTER
SET UP
Settings
Channel Settings
Clock
TV Aspect
Display Mode
Line1 Decoder
Progressive Mode
PBC
Factory Setup
Start
Auto Preset
Settings
Channel Settings
Clock
TV Aspect
Display Mode
Line1 Decoder
Progressive Mode
PBC
Factory Setup
Stop
Searching
11%
Auto Preset
,
continued
22
3
Press
M
/
m
to select a language, and press
ENTER.
The on-screen language changes to the
selected language.
to return to the Setup Display,
and follow the steps of “Setting the clock”
(see below).
that the clock is correctly set.
If incorrect, set the clock manually (page 72).
Or, the timer recording does not work
properly.
3
Follow the steps of “Setting the aspect
ratio for the connected TV” (see below).
Setting the aspect ratio for the
connected TV
1
Press
M
/
m
to select [TV Aspect], and press
,
.
2
Press
M
/
m
to select the aspect ratio of the
connected TV, and press ENTER.
[4:3]: For a standard 4:3 screen TV without a
wide screen mode. Select [Display Mode] in
[Settings] Setup.
[16:9]: For a wide-screen TV or standard TV
with a wide screen mode.
3
Press SET UP to turn off the Setup Display.
See “Additional settings” below and make
other adjustments accordingly.
Additional settings
Depending on the connected equipment, the
following adjustments may be necessary.
◆
If you connect a TV that accepts progressive
625p format signals to the COMPONENT VIDEO
OUT jacks
Set [Progressive Mode] in [Settings] Setup to [On]
(page 73).
◆
If you connect an AV amplifier (receiver) with a
Dolby Digital, DTS, or MPEG audio decoder
Make necessary settings in [Audio] Setup
(page 74).
You can make other adjustments using the Setup
Displays, such as picture, sound, and subtitle
languages. (See “Settings and Adjustments” on
page 69.)
Español
Português
OSD
Language
Menu
Audio
English
Deutsch
Italiano
Subtitle
Line1 Decoder
Progressive Mode
PBC
Factory Setup
Year 2005
Time 12 : 00
4:3
16:9
Settings
Channel Settings
Clock
TV Aspect
Display Mode
Line1 Decoder
Progressive Mode
PBC
Factory Setup
Auto Preset
23
H
ook
up
s and
Se
tti
n
gs
Connecting a VCR or Similar Device
After disconnecting the recorder’s mains lead from the mains, connect a VCR or similar recording device
to the LINE IN jacks of this recorder.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack) (page 66).
See also the operating instructions supplied with the connected equipment.
To record on this recorder, see “Recording From Connected Equipment” (page 45).
Connecting to the LINE 3 jack
Connect a VCR or similar recording device to the LINE 3/DECODER jack of this recorder.
Notes
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen.
Be sure to connect your VCR to the DVD recorder and your TV in the order shown below. To watch video tapes,
watch the tapes through a second line input on your TV.
• When you record to a VCR from this DVD recorder, do not switch the input source to TV by pressing the TV/DVD
button on the remote.
• If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected VCR.
AERIAL
IN
OUT
LINE 3 / DECODER
DIGITAL OUT
LINE 1 - TV
COAXIAL
PCM/DTS/
MPEG/
DOLBY DIGITAL
COMPONENT
VIDEO OUT
PB/CB
PR/CR
Y
LINE 2 OUT
L
AUDIO
VIDEO
R
LINE 4 IN
L
AUDIO
VIDEO
R
DIGITAL OUT
VIDEO OUT
SELECT
RGB
COMPO-
NENT
OPTICAL
S VIDEO
LINE 2 OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
TV
DVD recorder
to SCART input
to
i
LINE1-TV
VCR
to
i
LINE
3/DECODER
SCART cord
(not supplied)
VCR
DVD recorder
TV
VCR
DVD recorder
TV
Line input 1
Line input 2
,
continued
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299