64
2-11. DD-53 Board, DD Clamper
Preparation
1. Remove the outside panel assembly. (Refer to
“
2-2. Outside Panel Assembly
”
.)
2. Remove the CT-287A board. (Refer to “2-3. CT-287A Board”.)
3. Remove the VC-41 board. (Refer to “2-4. VC-41 board”.)
4. Remove the inside panel assembly. (Refer to “2-7-1. Inside Panel Assembly”.)
5. Remove the handle assembly. (Refer to “2-8-1. Handle Assembly”.)
6. Remove the DC-184 board. (Refer to “2-9. DC-184 board”.)
7. Remove the AR-5 board. (Refer to “2-10. AR-5 Board”.)
Procedure
1. Remove the AR heat sink.
2. Remove the two precision screws, and then remove the duct cover (lower).
3. Release the flexible board from the two bosses.
Holes
AR heat sink
Bosses
Bosses
Holes
Duct cover (lower)
Flexible board
Precision screws
(P2 x 4)