26
3. Remove the precision screw (P2 x 4), and then DC cable clamper.
4. Remove the 12 precision screws (P2 x 4).
5. Release the two hooks, and then remove the outside panel assembly.
Be careful not to break the flexible flat cable.
6. Disconnect the flexible flat cable from the connector (CN4612) on the CT-287A board.
7. Install the removed parts by reversing the steps of removal.
Note
CN4612
Precision
screws
(P2 x 4)
Precision screws
(P2 x 4)
Precision screws
(P2 x 4)
Precision
screw
(P2 x 4)
Precision
screw
(P2 x 4)
Precision
screw
(P2 x 4)
Outside panel assembly
DC cable clamper
Hooks
Flexible flat cable
CT-287A board