65
4. Disconnect the harness from the connector (CN0100) on the DD-53 board.
5. Remove the four precision screws, and then remove the BT holder assembly.
6. Remove the four precision screws.
7. Release the two bosses, and then remove the DD-53 board in the direction of the arrow.
8. Disconnect the flexible board from the connector (CN0604) on the DD-53 board.
9. Disconnect the harness from the connector (CN0601) on the DD-53 board.
DD-53 board
BT holder assembly
CN0100
Harness
Harness
Arrangement of
harness
Precision screws
(P2 x 4)
DD-53 board
Hole
Hole
CN0601
CN0604
Harness
Flexible board
Boss
Boss
Precision screws
(P2 x 4)
