56
9. Disconnect the flexible board from the connector (CN1000) on the IF-1346 board.
10. Disconnect the flexible flat cable from the connector (CN2000) on the IF-1346 board, and then remove the microphone unit.
11. Remove the two precision screws, and then remove the panel electrostatic plate.
12. Remove the three precision screws, and then remove the IF-1346 board.
13. Install the removed parts by reversing the steps of removal.
Flexible board
CN2000
CN1000
IF-1346 board
Microphone unit
Panel electrostatic plate
Flexible flat cable
Precision screws
(TP2 x 5)
Precision screws
(TP2 x 5)
Control panel