Sony PXW-X160, Operating Manual

Page: 51 / 120

About the Web Menu (PXW-X180 only) 51
Record
ing
Notes
• Depending on the device, the Wi-Fi remote
commander may not appear properly on the device’s
screen even though you input http://<camcorder’s IP
address>/rm.html in the address bar. In this case, input
“rms.html” for a smartphone or “rmt.html” for a tablet
instead of “rm.html” at the end of the address to
display the Wi-Fi remote commander properly.
• The Wi-Fi remote commander on the device’s screen
may not match the actual status of the camcorder in the
following cases. When this happens, refresh the
browser on the device.
—when the camcorder is restarted while the Wi-Fi
connection is established
—when the camcorder is controlled directly while
the Wi-Fi connection is established
—when the device is reconnected
—when you operate forward/backward on the
device’s browser.
• If the Wi-Fi signal is poor, the Wi-Fi remote
commander may not work properly.
The Web menu of the camcorder appears by
accessing the camcorder from the browser of a
device that is connected to the camcorder via a
wireless LAN. You can perform the settings for
the wireless function or the operation of the file
transfer.
Initial screen
When connecting the camcorder and device, and
accessing the camcorder from the browser on the
device, the “SD Card” screen in “Media Info” of
the camcorder appears on the browser.
About the setting menu
The setting menu appears by touching at the
upper left of the screen. Touch the item that you
want to set.
“Settings”
Displays the screen for the settings of the
camcorder.
• “Wireless Module”
“Format”: Format settings (page 52)
• “Wireless LAN”
“Station Settings”: Wireless LAN settings
(page 52)
“Status”: Status for the wireless LAN settings
(page 53)
• “Upload Settings”
Upload settings (page 54)
Notes
• When the “Settings” screen is displayed, the desired
setting screen appears by touching the following.
About the Web Menu
(PXW-X180 only)