Sony PXW-X160, Operating Manual

Page: 45 / 120

Connecting to Other Device via Wireless LAN (PXW-X180 only) 45
Record
ing
Notes
• The operation method differs depending on the
device.
4
Start the browser on the device, then
access “http://192.168.1.1:8080/
index.html.”
The screen for inputting “User Name” and
“Password” appears.
5
Input the user name and password, then
select “OK.”
For the user name and password of the access
authentication, check “Basic Authentication”
of the System menu
(page 85) .
The camcorder connects to an existing access
point of the wireless LAN as a client. The
camcorder and device connect via the access
point.
Connecting to the access point with the
WPS function
If the access point is compatible with the WPS
function, you can connect to the access point with
simple settings. If the access point is not
compatible with the WPS function, see
“To
connect to the access point in the station mode
without the WPS function” (page 53)
.
1
Turn the access point on.
2
Turn the camcorder on.
3
Set the camcorder’s wireless LAN
operation mode to the station mode by
setting “Setting” in “Wi-Fi” of the
System menu to “Station.”
Notes
• It may take a time (for 30 to 60 seconds) until the
camcorder is in the station mode. Wait until the
flashing signal status indication for the wireless
LAN connection status on the LCD/viewfinder
screen
(page 16) is turned on.
4
Activate “WPS” in “Wi-Fi” of the
System menu.
5
Press the WPS button of the access
point.
For the operation of the WPS button, refer to
the operating instructions of the access point.
When the connection is completed, the signal
status indication for the wireless LAN
connection status
(page 16) lights at a
strength of more than 1.
Notes
• If the connection fails, perform steps from step 1
again.
6
Connect the device to the access point.
For connecting, refer to the operating
instructions of the device.
7
Start the browser on the device, then
access to “http://<IP address that the
access point assigns to the
camcorder>:8080/index.html.”
For the camcorder’s IP address, check “IP
Address” in “Wi-Fi” of the System menu.
The screen for inputting “User Name” and
“Password” appears.
Connecting with the wireless LAN
station mode
Smartphone/
tablet
Computer
Access
point