Useful Functions
37
Record
ing
You can review the last recorded clip on the
screen (Rec Review).
Press the REC REVIEW button
after you stop recording.
You can use an assignable button
by
assigning the Rec Review function to an
assignable button.
Rec Review stops at the end of the clip, then
resumes the STBY (recording standby) status.
To stop Rec Review
Press the REC REVIEW button, STOP button, or
assignable button assigned to the Rec Review
function.
Notes
• The playback control buttons other than the record
button do not work during the Rec Review playback.
• Rec Review does not work when changing the video
format after recording.
• The Setup menus cannot be operated during Rec
Review.
Normally, a clip is created as an independent file
each time you start and stop recording. However,
this function allows you to start and stop
recording while continuously recording to the
same clip, for as long as the function remains
enabled. This is convenient when you do not want
to generate a large number of short clips, and
when you want to record without worrying about
exceeding the clip limit. It is still easy to find
recording start points, because a Rec Start mark is
recorded at the recording start point each time you
start recording.
For details about the recording format that is
compatible with Clip Continuous Rec, see
“Special Recording and Compatible Formats”
(page 92)
Settings before shooting
Perform the setting with “Clip Continuous Rec”
of the Recording menu in advance.
The Clip Continuous Rec function is enabled and
“Cont” appears on the screen
by setting
“Setting” to “On.”
Notes
• The Clip Continuous Rec function cannot be used at
the same time as the Slow & Quick Motion function.
When you set Clip Continuous Rec to on, the Slow &
Quick Motion function is disabled.
• The Clip Continuous Rec function cannot be set to on
during recording.
To shoot in Clip Continuous Rec mode
Start the recording after completing the required
setting.
Press the record button.
When recording starts, the “Cont” indication on
the screen changes to the “
z
Rec” indication (
z
is red).
Notes
• During recording or in recording standby mode (when
the “Cont” indication is lit), if you remove the SxS
memory card, the battery, or the power source, the SxS
memory card needs to be restored. Exit Clip
Continuous Rec mode and then remove the SxS
memory card. When the “Cont” indication is flashing
(at 1 flash/s), you can remove the SxS memory card.
• Stop the recording after the recording continues for
two or more seconds.
To exit Clip Continuous Rec mode
With the camcorder in recording standby mode,
set “Setting” in “Clip Continuous Rec”
of the Recording menu to “Off.”
Limitations
A single continuous clip cannot be created if you
perform one of the following operations while the
camcorder is recording or in recording standby
mode. A new clip will be created when you next
start recording.
• Operate on a clip (lock, delete, or rename a clip)
• Change the memory card slot
• Change the recording format
• Turn the camcorder off by setting the ON/
STANDBY switch to STANDBY
• Display the thumbnail screen
• Play a clip
• Stop the Clip Continuous Rec mode
Rec Review
Clip Continuous Rec
Summary of Contents for PXW-X160
Page 118: ...Index 118 Appendices ...
Page 119: ...Index 119 Appendices ...
Page 120: ...Printed in China ...