Sony PCG-505E Page 59 User Manual Download

Page: 59 / 101

Sony Notebook Computer User Guide

Notebook Setup Tabs

Tab

Descriptions

About This Computer

Display system information, including memory
capacity, serial number, and BIOS version.

Printer

Change printer port mode settings.

Power On
Device Sequence

Select the order of drives and devices from which
you want to load the operating system.

Power On Password

Set the password to secure your computer.

Enable Ports

Disabling ports releases resources to the system. To
change the serial, audio, and modem settings, click
Advanced on the Basic/Advanced tab.

Basic/Advanced

Toggle between Advanced mode (additional screens
with advanced settings) and Basic mode of display.
Advanced mode includes Serial, Audio, infrared
and View Resources tabs.

✍

For more information about each option, click Help on the Sony Notebook Setup screen to
display the help file.

Summary of Contents for PCG-505E






































































































Search results

Summary of Contents for PCG-505E

Reviews:

Related manuals for PCG-505E

Brands by name

Popular brands

Sony PCG-505E, User Manual

Search results

Summary of Contents for PCG-505E

Reviews:

Related manuals for PCG-505E

Brands by name

Popular brands