Sony NXCAM HXR-NX100 Operating Manual Download

Page: 86 / 120

SAFETY ZONE

OFF

Does not display the safety zone.

80%, 90%

If you select either one, you can display
markers at boundaries of display area that
regular home TVs can display.

GUIDEFRAME

OFF

Does not display the guideframe.

Displays the guideframe.
You can check the horizontal and vertical
aspect of a subject.

Notes

• Only the time code is output to an external

device via external output jacks when
[MARKER] is set to [ON], even if [DISPLAY
OUTPUT] is set to [ALL OUTPUT].

• You cannot display markers during [FOCUS

MAGNIFIER].

• You cannot output markers on an external

device.

Tips

• You can display all types of markers at the same

time.

• You can obtain a balanced composition by

positioning the subject at the cross points of the
guideframe marker.

• You can assign [ON/OFF] to an ASSIGN button

(p. 58).

You can set the magnification of expanded
focus.

×4.0

×8.0

×4.0/×8.0

The setting changes in the order [×4.0]

[×8.0]

[OFF] with each press of the

ASSIGN5/FOCUS MAG button.

OFF

Does not display the iris, gain and shutter
speed settings.

Constantly displays the iris, gain and
shutter speed settings on the LCD screen.

Tips

• The settings appear on the LCD screen during

the manual adjustment regardless of the settings
of this function.

•

indicates that the settings are automatically

adjusted values.

• The displayed settings are different from the

settings that will be displayed when you press
the ASSIGN button to which [DATA CODE] is
assigned (p. 63).

• You can assign this function to an ASSIGN

button (p. 58).

FOCUS MAG RATIO

CAMERA DATA DISPLAY

Iris value

Shutter speed value

Gain value

(DISPLAY SET) menu (Continued)

Summary of Contents for NXCAM HXR-NX100

























































































































Search results

Summary of Contents for NXCAM HXR-NX100

Reviews:

Related manuals for NXCAM HXR-NX100

Brands by name

Popular brands

Sony NXCAM HXR-NX100, Operating Manual

Search results

Summary of Contents for NXCAM HXR-NX100

Reviews:

Related manuals for NXCAM HXR-NX100

Brands by name

Popular brands