Sony NXCAM HXR-NX100 Operating Manual Download

Page: 20 / 120

Connect the DC plug to the DC IN
jack of the camcorder.

Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).

Turn the ON/STANDBY switch to
STANDBY (

The CHG lamp lights up and charging
starts.

When charging ends

The CHG lamp turns off when the battery is
fully charged.

Note

Even if the CHG lamp is not lit, the battery
charger is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet (wall socket).

Disconnect the AC Adaptor from the DC
IN jack.

Tip

• You can check the remaining battery life with

the status check function (p. 64).

To remove the battery pack

Turn the ON/STANDBY switch to
STANDBY (

). Press and hold the BATT

RELEASE button, and slide the battery up
and out.

To store the battery pack

If the battery pack is not in use for a while,
run down the battery and store it (p. 109).

Charging time

Approximate time (minutes) required when
you charge a fully discharged battery pack.

Battery pack

Full charge time

NP-F770

370 minutes

BATT RELEASE button

Step 2: Charging the battery pack (Continued)

Summary of Contents for NXCAM HXR-NX100

























































































































Search results

Summary of Contents for NXCAM HXR-NX100

Reviews:

Related manuals for NXCAM HXR-NX100

Brands by name

Popular brands

Sony NXCAM HXR-NX100, Operating Manual

Search results

Summary of Contents for NXCAM HXR-NX100

Reviews:

Related manuals for NXCAM HXR-NX100

Brands by name

Popular brands