Sony MXD-D400 Operating Instructions (primary manual) Page 9 Operating Instructions Manual Download

Page: 9 / 52

CD/

/MD – P

Press OPEN/CLOSE.

Place a disc with the label side up on
the disc tray.

Press OPEN/CLOSE again to close the
disc tray.

If you press

instead of OPEN/CLOSE,

the disc tray will close and playback will
start automatically.

Notes

• Do not use a disc with tape, seals or paste on it as this

may cause malfunction.

• Do not forcibly press the disc tray closed with your

finger, as this may cause malfunction.

Example: When a CD is loaded

Set to CD in CD MD select switch.

Press PLAY MODE in stop mode
repeatedly until the mode you want
appears in the display.

Press

Note

You cannot change the play mode during playback.

CD/MP3/MD – Play

Loading a CD

When you play a 8 cm disc, place it
on the inner circle of the tray.

Playing a CD

— Normal Play/Shuffle Play/Search Play

Select

To play

No display
(Normal Play)

The tracks on the disc in
original order.

SHUFFLE
(Shuffle Play)

All tracks on the disc in
random order.

PROGRAM
(Program Play)

The tracks on the disc in the
order you want them to be
played (see “Creating your
own program” on page 14).

m/M

Total number of track

Total playing time

continued

Summary of Contents for MXD-D400 Operating Instructions (primary manual)





















































Search results

Summary of Contents for MXD-D400 Operating Instructions (primary manual)

Reviews:

Related manuals for MXD-D400 Operating Instructions (primary manual)

Brands by name

Popular brands

Sony MXD-D400 Operating Instructions (primary manual), Operating Instructions Manual

Search results

Summary of Contents for MXD-D400 Operating Instructions (primary manual)

Reviews:

Related manuals for MXD-D400 Operating Instructions (primary manual)

Brands by name

Popular brands