Sony MXD-D400 Operating Instructions (primary manual) Operating Instructions Manual Download Page 13

Page: 13 / 52

CD/

/MD – P

Set to CD or MD in CD MD select switch.

You can quickly locate any track by using the
AMS (Automatic Music Sensor) control on the
deck,

and

buttons on the remote, or

number buttons on the remote.

Tips

• To go quickly to the beginning of the last track, press

(or turn AMS counter clockwise) in stop mode.

• To pause playing at the beginning of a track, press

(or turn AMS) after pausing playback.

Playing a track by entering the
track number

You can also select the desired track using the
remote during Normal Play. Press the number
button(s). Playback automatically starts.

To enter a track number over 10

Press >10 once if it is a 2-digit track number,
and twice if it is a 3-digit track number.

Enter the corresponding digits for the same
number of “–” flashing in the display.
To enter 0, press 10/0.

Examples:

• To enter 6 while “– – –” flashes in the display, press

10/0, 10/0 and 6.

• To enter 100 while “– – –” flashes in the display,

press 1, 10/0 and 10/0.

Locating a specific track

— AMS Function

To locate

Do this

The next or
succeeding tracks

During playback, press

(or

turn AMS clockwise) until you
find the track.

The beginning of
the current or
preceding tracks

During playback, press

(or

turn AMS counter clockwise) until
you find the track.

A specific track
by using AMS

While the deck is stopped, press

(or turn AMS), then

press

(or AMS).

./>

CD/MD

AMS

(CD)

AMS

(MD)

Number buttons

Summary of Contents for MXD-D400 Operating Instructions (primary manual)





















































Search results

Summary of Contents for MXD-D400 Operating Instructions (primary manual)

Reviews:

Brands by name

Popular brands

Sony MXD-D400 Operating Instructions (primary manual), Operating Instructions Manual

Search results

Summary of Contents for MXD-D400 Operating Instructions (primary manual)

Reviews:

Brands by name

Popular brands