Sony MXD-D400 Operating Instructions (primary manual), Operating Instructions Manual

Page: 48 / 52

48
GB
Guide to the Serial Copy Management
System
Digital audio components, such as CDs, MDs, and
DATs let you copy music easily with high quality by
processing music as a digital signal.
To protect the copyrighted music programs, this deck
uses the Serial Copy Management System that allows
you to make only a single copy of a digitally recorded
source through digital-to-digital connections.
You can make only a first generation
copy
*
through a digital-to-digital
connection.
For example:
1
You cannot make a second digital copy via the
digital input jack onto another DAT or MD deck
from the first-generation copy recorded by the
deck digitally.
2
You can make a copy of a digital signal from a
digitally recorded analogue sound programme
(for example, an analogue record or a music
cassette tape) or from a digital satellite
broadcast programme, but you cannot make a
second copy.
* A first-generation copy means a digital recording of
a digital signal made on digital audio equipment. For
example, if you record from this deck’s CD player to
the MD deck, you make a first-generation copy.
CD player section
System Compact Disc digital
audio system
Laser Semiconductor laser
(
λ
=780 nm)
Frequency response 20 Hz – 20 kHz (±0.5 dB)
Wow and flutter Below measureable limit
(±0.001% W.PEAK)
MD deck section
System MiniDisc digital audio system
Disc MiniDisc
Laser Semiconductor laser
(
λ
=780 nm)
Emission duration:
continuous
Sampling frequency 44.1 kHz
Frequency response 20 Hz – 20 kHz (±0.5 dB)
Inputs
Outputs
General
Power requirements
U.S.A. and Canada
120 V AC, 60 Hz
Europe 230 V AC, 50/60 Hz
Power consumption 19 watts
Less than 1 watt (at the
power saving mode)
Dimensions (w/h/d) incl. projecting parts and controls
Approx. 430 × 108 × 399 mm
Mass Approx. 5.4 kg
Supplied accessories
See page 7.
US and foreign patents licensed from Dolby
Laboratories.
Design and specifications are subject to change
without notice.
Specifications
Jack type Input
impedance Rated
input Minimum
input
ANALOG IN Pin jack 47 kilohms 500 mVrms 250 mVrms
DIGITAL
OPTICAL IN
Squqre
optical
connector
jack Optical wave
length:
660 nm
– –
Jack type Rated output Load
impedance
ANALOG OUT
Pin jack 2 Vrms
(at 47 kilohms) Over 10 kilohms
DIGITAL
OPTICAL OUT Squqre optical
connector jack -18 dBm Optical wave
length:660 nm
PHONES Stereo phone
jack 10 mW 32 ohms