36
GB
5
Press
.
or
>
repeatedly (or turn
AMS) until “Gp Release?” appears,
then press YES (or AMS).
“REL Gp** (selected group number)??”
appears.
6
Press YES (or AMS).
Releasing all groups on an MD
— All Release Function
1
In step 5 above, press
.
or
>
repeatedly (or turn AMS) repeatedly
until “Gp All REL?” appears, then
press YES (or AMS).
“All REL??” appears.
2
Press YES (or AMS).
The MD deck lets you erase unwanted tracks
quickly and easily.
You can restore the erased contents using the
Undo function immediately after the erasing
(page 41). However, you cannot restore the
erased contents after performing other editing.
Before erasing, make sure if it is all right to erase
the content.
The three options for erasing recordings are:
• Erasing a single track (Track Erase Function)
• Erasing all tracks (All Erase Function)
• Erasing a portion of a track (A-B Erase
Function)
Erasing a single track
— Track Erase Function
When you erase a track, the total number of
tracks on the MD decreases by one and all the
tracks following the erased one are renumbered.
Example: Erasing track 2
As the track numbers are renumbered as above,
it is recommended to erase from the latter tracks
when erasing several tracks, so as not to change
the track numbering of unerased tracks.
1
Set to MD in CD MD select switch.
2
Press MENU/NO.
3
Press
.
or
>
repeatedly (or turn
AMS) until “Tr Erase?” appears, then
press YES (or AMS).
Playback of the selected track starts.
Erasing recordings
— Erase Function
Erase track 2
Track number
Original
tracks
After
ERASE
A
B
C
D
A
C
D
Summary of Contents for MXD-D400 Operating Instructions (primary manual)
Page 51: ...Additional Information 51GB ...
