M
D
–
E
d
it
in
g
39
GB
You can use this function to combine 2 tracks
into a single track. The total number of tracks
decreases by one and all tracks following the
combined ones are renumbered.
Example: Combining track 3 to track 1
Example: Combining track 1 to track 4
1
Set to MD in CD MD select switch.
2
Press MENU/NO.
3
Press
.
or
>
repeatedly (or turn
AMS) until “Combine?” appears, then
press YES (or AMS).
Playback starts.
4
Press
.
or
>
repeatedly (or turn
AMS) until the first track number of the
two to be combined appears, then
press YES (or AMS).
For example, to combine track 1 to 4, select
4.
5
Press
.
or
>
repeatedly (or turn
AMS) until the second track number of
the two to be combined appears.
6
Press YES (or AMS).
“Complete!” appears for a few seconds.
Playback of the track starts.
Notes
• When you combine two tracks that are registered into
different groups, the second track is reregistered into
the group containing the first track. In addition, if
you combine a track that is registered to a group with
a track that is not registered to a group, the second
track takes the same registration setting as the first
track. However, when the Group Function is on, you
can only combine tracks within the selected group.
• Tracks recorded in different recording modes (stereo,
LP2, LP4 or MONO) cannot be combined.
• If both of the combined tracks have track titles, the
title of the second track is erased.
Combining recorded
tracks
— Combine Function
Track number
Original
tracks
After
COMBINE
A
B
C
D
A
C
B
D
Original
tracks
After
COMBINE
Track number
A
B
C
D
B
C
D
A
Second track
number to be
continued
First track number
Summary of Contents for MXD-D400 Operating Instructions (primary manual)
Page 51: ...Additional Information 51GB ...
