Sony MXD-D400 Operating Instructions (primary manual) Operating Instructions Manual Download | Manualshive

Page: 44 / 52

background image

44

GB

This deck has a Self-diagnosis display function
to let you know if there is a deck malfunction.
The display shows a code made up of three or
five letters and a message alternately to show
you the problem. To solve the problem refer to
the following list. If any problem persists,
consult your nearest Sony dealer.

C11/Protected

The MD is protected against erasure.

c

Remove the MD and slide the tab to close the slot
(page 20).

C12/Cannot Copy

You tried to record a CD with a format that the deck
does not support, such as a CD-ROM or MD data.

c

Replace the playable disc.

C13/REC Error

Recording could not be performed properly.

c

Move the deck to a stable place, and start
recording over from the beginning.

The MD is dirty or scratched, or the MD does not
meet the standards.

c

Replace the MD and start recording over from the
beginning.

C13/Read Error

The MD deck cannot read the disc information
properly.

c

Remove the MD once, then insert it again.

C14/TOC Error

The MD deck cannot read the disc information
properly.

c

Replace the MD.

c

Erase all the recorded contents of the MD using
the All Erase Function (page 37).

C41/Cannot Copy

The digitally dubbed material cannot be recorded
digitally (page 47).

C71/Din Unlock

The digitally dubbed material cannot be recorded
digitally (page 47).

A moment’s lighting is due to the signals of the
digital program being recorded. This does not affect
the recorded material.

The digital optical cable is disconnected, or the
power of the connected component is turned off
while recording the digital audio from the
component connected to the DIGITAL OPTICAL
IN jack.

c

Connect the digital optical cable, or turn on the
power of the connected component.

E0001/MEMORY NG

The component has internal problem.

c

Consult your nearest Sony dealer.

E0101/LASER NG

There is a problem with the laser pickup.

c

The laser pickup may be damaged. Consult your
nearest Sony dealer.

E0201/LOADING NG

There is a problem with the loading.

c

The loading may be failed. Consult your nearest
Sony dealer.

Self-diagnosis display

«
...
42
43
44
45
46
...
»

Summary of Contents for MXD-D400 Operating Instructions (primary manual)





















































Reviews:

No comments

Related manuals for MXD-D400 Operating Instructions (primary manual)

Brand: Cambridge Audio Pages: 5

SLMP50 - PORT. CD PLAYER

Brand: Panasonic Pages: 8

Audio Steno AU581

Brand: Apacer Technology Pages: 1

Brand: kaiboer Pages: 16

Brand: SanDisk Pages: 24

Brand: DSPPA Pages: 13

Brand: Manta Pages: 44

SO SPEAKY HDMI+ SK5

Brand: DANE-ELEC Pages: 16

Brand: DANE-ELEC Pages: 2

Brand: Datavideo Pages: 52

Brand: Irradio Pages: 49

Meizu MINI PLAYER

Brand: DANE-ELEC Pages: 40

Brand: Oakley Pages: 28

Brand: invotel Pages: 2

Brand: JVC Pages: 78

Brand: Mattel Pages: 18

Brand: Philips Pages: 29

Media Player Box

Brand: FCC Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands