Sony MVS-6000, User Manual

Page: 42 / 400

42
Names and Functions of Parts of the Control Panel
Ch
apt
er 2
Me
nu
s
an
d Cont
rol P
ane
l
Device Control Block (Joystick)
The joystick type device control block is
used for three-dimensional transform
operations using a DME.
a
Operating buttons
The functions of these buttons are
equivalent to the functions in three-
dimensional transform operation mode of
the operating buttons of the trackball type
device control block.
Note
To select a required DME channel, use the
region selection buttons in the numeric
keypad control block.
Use of the SHIFT button
Pressing a button in the device control
block while holding down the [SHIFT]
button enables the shifted function of the
button. Also, pressing a button in the
keyframe control block while holding down
the [SHIFT] button enables the shifted
function of the button.
About the [CLR WORK BUFR] (clear
work buffer) button
When [M/E-1] or [P/P] is selected along in
the numeric region selection buttons of the
keypad control block, press this button
twice in rapid succession to reset all
parameters of the selected M/E or P/P to
their initial values. When a DME channel is
selected in the region selection buttons, the
operation is the same as when using a
trackball type device control block in the
three-dimensional transform operation
mode.
PAUSE
COPY
INS
RUN
MENU LOCAL GLB SRC TRGT
ROT
SHIFT
PASTE REV
MOD
ASP
SKEW
PERS
STOP
NEXT
KF
CLR
WORK
BUFR
DEL
X
DELAY
UNDO
LOC
XYZ LOC
SIZE AXIS
LOC
Y Z CTR
NEXT
KF
PREV
KF
GOTO
KF/TC
CONST
DUR
EFF
DUR
KF
DUR
EDIT
ENBL
FROM
TO
RUN
CTRL
KF
LOOP
EFF
LOOP
RE
WIND
NORM
/REV
1 Operating buttons 2 Joystick
3 MENU button