Sony MVS-6000 User Manual Download Page 297

Page: 297 / 400

297

Clip Transition Operations

Cha

r 7

e Memor

Press the [Clip] button.

The Clip menu appears, and the status area shows a list of clips.

Select the clip to use in the clip transition.

Return to the Clip Transition menu, and in the <BKGD Transition Type>
group, select the background transition type.

Note

For details of the background transition selected here, see the various
adjustments in the M/E-1 >Misc >Transition menu.

In the <Select> group, press [BKGD Transition].

Use either of the following methods to set the background transition start
point independently of the clip playback timing.

• Move the fader lever to the desired position, and in the <BKGD

Transition Set Timing> group press [Start].

Clip display area

Background transition display area

Clip transition display area

Summary of Contents for MVS-6000

















































































































































































































































































































































































































Search results

Summary of Contents for MVS-6000

Reviews:

Brands by name

Popular brands

Sony MVS-6000, User Manual

Search results

Summary of Contents for MVS-6000

Reviews:

Brands by name

Popular brands