Sony MVS-6000 User Manual Download Page 243

Page: 243 / 400

243

DME Wipe Settings for Independent Key Transitions

Chap

r 6

DME

Wipes

•

Slide/Squeeze:

slide and squeeze

•

Door:

door

•

Frame I/O:

frame in-out

•

2D Trans/3D Trans:

2D trans and 3D trans

•

User Program:

user programmable DME

For details of DME wipe patterns, see “Types of DME Wipe Pattern”
(page 222) and “DME Wipe Pattern List” (page 363).

The patterns from the selected pattern group appear on the screen.

Press the button to select the desired pattern.

Setting Independent Key Transition DME Wipe
Modifiers

You can add modifiers such as pattern position and size for an independent key
transition DME wipe.

For introductory information, see “Setting the DME wipe position
(Positioner)” (page 235) and “Setting the DME wipe pattern size (Size)” (page
237).

Setting the DME wipe position (Positioner)

For applicable pattern numbers,

see page 229

In the <Position> group of the Key1 DME Wipe Adjust menu, press
[Position], turning it on.

Set the following parameters.

To return the DME wipe pattern position to the center of the screen

In the <Position> group, press [Center].

Setting the DME wipe pattern size (Size)

For applicable pattern numbers,

see page 230

In the Key 1 DME Wipe Adjust menu, press [Size], turning it on.

Knob

Parameter

Adjustment

Setting values

Horizontal position

–200.00 to +200.00

Vertical position

–200.00 to +200.00

Summary of Contents for MVS-6000

















































































































































































































































































































































































































Search results

Summary of Contents for MVS-6000

Reviews:

Brands by name

Popular brands

Sony MVS-6000, User Manual

Search results

Summary of Contents for MVS-6000

Reviews:

Brands by name

Popular brands