Sony MHC-V909AV Operating Instructions Manual Download

Page: 64 / 68

SONY MHC-V909AV (E) 3-860-316-11

Actual page number:

Tape Deck

The tape does not record.

•No tape in the cassette holder.
•The tab has been removed from the

cassette (see “To save a tape
permanently” on page 61).

•The tape has reeled to the end.

The tape does not record nor play or there
is a decrease in sound level.

•The heads are dirty. Clean them (see

“Cleaning the tape heads” on page 61).

•The record/playback heads are

magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
61).

The tape does not erase completely.

•The record/playback heads are

magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
61).

There is excessive wow or flutter, or the
sound drops out.

•The capstans or pinch rollers are dirty.

Clean them (see “Cleaning the tape
heads” on page 61).

Noise increases or the high frequencies are
erased.

•The record/playback heads are

magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
61).

Tuner

Severe hum or noise (“TUNED” or
“STEREO” flashes in the display.

•Adjust the antenna.
•The signal strength is too weak. Connect

the external antenna.

A stereo FM program cannot be received in
stereo.

•Press STEREO/MONO so that “STEREO”

appears.

Troubleshooting (continued)

If other troubles not described
above occur, reset the system as
follows:

Unplug the power cord.

Plug the power cord back in.

Press NEXT, ENTER/NEXT, and DISC 1 at
the same time.

Press POWER to turn on the power.

11/61-68_MHC-V909AV.11E

98.11.9, 11:50 AM

Summary of Contents for MHC-V909AV





































































Search results

Summary of Contents for MHC-V909AV

Reviews:

Related manuals for MHC-V909AV

Brands by name

Popular brands

Sony MHC-V909AV, Operating Instructions Manual

Search results

Summary of Contents for MHC-V909AV

Reviews:

Related manuals for MHC-V909AV

Brands by name

Popular brands