45
SONY MHC-V909AV (E) 3-860-316-11
Actual page number:
Playing CDs without
interruption
–– CD Non-Stop Play
You can play CDs without pausing between
tracks.
You cannot use this function with VIDEO
CDs.
1
Press FUNCTION repeatedly until
“CD” appears in the display.
2
Press CD NON-STOP so the
indicator on the button lights up.
3
Press
·∏
.
To cancel Non-Stop Play
Press CD NON-STOP repeatedly until
“NON-STOP OFF” appears in the display.
1
2
3
To
Press
Check the program
CHECK on the remote
repeatedly. After the last
track, “CHECK END”
appears.
Clear a track from
CLEAR on the remote in
the end
stop mode.
Clear a specific
CHECK on the remote
track
repeatedly until the
number of the track to be
erased lights up, then press
CLEAR.
Add a track to the
1 Select the disc with the
program
DISC 1~3 buttons.
2 Select the track by
turning the jog dial.
3 Press ENTER/NEXT.
Clear the entire
p
once in stop mode or
program
twice while playing.
Tips
• To program tracks using the remote, press the
numerical buttons (for the tracks you want to
play) in the order you want in step 4, then skip
step 5.
• To program tracks numbered over 10, press >10,
then press the numerical buttons. Press 10/0 to
enter 0. See the example below.
– To enter the track number 30; press >10
m
3
m
10/0.
• The program you made remains in the CD player
even after it has been played back. Press
·∏
to
play the same program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track numbered over
20
– the total playing time has exceeded 100 minutes.
POWER
06/29-45_MHC-V909AV.11E
98.11.9, 11:47 AM
45
