28
GB
Additional Information
On safety
• Do not drop, hit, or otherwise expose the
digital surround processor or headphones
to strong shocks of any kind. This could
cause a breakdown.
• Do not disassemble or attempt to open any
parts of the system.
On power sources and placement
• If you are not going to use the system for a
long time, unplug the AC power adapter
cord from the outlet. When removing the
cord, grip the plug. Do not pull on the cord.
• Do not place the system at any of the
following locations.
– Location exposed to direct sunlight, near
a heater, or other extremely high-
temperature location
– Dusty location
– On an unsteady or inclined surface
– Location exposed to large amounts of
vibrations
– Bathroom or other high-humidity
locations
On headphones
To protect your ears
Listening to sounds at a high volume over
long periods of time can harm your hearing.
To protect your ears, do not listen with the
volume raised too high.
Act considerately
When the volume is too high, the sound flows
outside the headphones. Be careful not to
raise the volume so high that it bothers the
people around you.
There is a tendency to raise the volume when
using in places with lots of noise. However,
the volume should be kept at a level where
you can respond if called while listening to
the headphones.
On ear pads
The ear pads may become worn over long
periods of use and storage. To replace the ear
pads, consult your nearest Sony dealer.
On cleaning
Use a soft cloth slightly moistened with mild
detergent solution. Do not use solvents such
as thinner, benzene or alcohol as these may
damage the surface.
When a malfunction or breakdown
occurs
• If a malfunction or breakdown occurs or if a
foreign object gets inside the unit,
immediately turn off the power and consult
your nearest Sony dealer.
• When taking the system to Sony dealer, be
sure to take both the headphones and
digital surround processor.
Precautions
Summary of Contents for MDR DS5000
Page 114: ...30ES Información adicional ...
Page 115: ...31ES Información adicional ...
Page 116: ...Printed in Korea ...