Sony MCC3000MT, Service Manual

Page: 67 / 194

3-4-8. Operating Cursor Prev
• The Cursor Prev menu enables the user to move the RPN cursor position to the next already-registered RPN
correction point after the present position in the descending order of the addresses during the manual registration
of RPN.
Note
If multiple RPN positions have the same address in the descending order of the Cursor V Position, the RPN cursor
moves in the descending order of the Cursor H Position.
3-4-9. Compensation Level Display
• The Compensation Level menu indicates the compensation level of the already-registered RPN correction point
when the crosshair cursor is moved to a correction point by the Cursor Next or Cursor Prev operation, and if the
compensation mode of the already-registered point is Compensation.
• The Compensation Level menu is dedicated to display only and the cursor cannot be moved to this menu.
3-4-10. Executing Record
• The Record menu enables the manual registration of RPN.
• When Record menu is selected, the Execute and Cancel choices appear. Selecting Execute starts the registration of
RPN.
3-4-11. Executing Delete
• The Delete menu enables manual deletion of RPN.
• When the Delete menu is executed, the RPN registration of a pixel at an address specified by the Cursor H Position
and Cursor V Position is deleted from RPN data.
• When the Delete menu is selected, the Execute and Cancel choices appear. Selecting Execute starts deletion of
RPN.
3-4-12. Readout Mode Setting
• The Readout Mode menu enables the user to select the Frame readout mode of the imager in order to facilitate
viewing the RPN position on a monitor screen.
• The Readout Mode setting is always set to Field when the power is turned On.
3-4-13. Executing Reset
• The Reset menu enables the user to delete the RPN correction point data that is registered by Auto Detection and
Auto Black Balance after the equipment is shipped from the factory.
• The RPN data that is registered at the factory and the RPN data is manually registered cannot be deleted by the
Reset.
• When the Reset menu is selected, the Execute and Cancel choices appear. Selecting Execute starts reset of RPN.
MCC-3000MT
3-7