Sony MCC3000MT, Service Manual

Page: 47 / 194

2-9. AVP-18 Board
Preparation
1. Remove the top cover. (Refer to “2-2. Top Cover” . )
2. Remove the main board assembly (for CAMERA A). (Refer to “2-6. Main Board Assembly (for CAMERA A)” . )
3. Remove the main board assembly (for CAMERA B). (Refer to “2-6. Main Board Assembly (for CAMERA A)” . )
(in case of removing the AVP-18 board for CAMERA B)
4. Remove the DPR-340 board. (Refer to “2-8. DPR-340 Board” . )
Procedure
1. Remove the screw to detach the USB stopper.
2. Disconnect the CN-3550 board from the connector (CN700) on the AVP-18 board.
CN-3550 board
USB stopper
AVP-18 board
CN700
B3 x 6
3. Remove the two screws (B3 x 6) to detach the main board frame (B).
MCC-3000MT
2-15