Sony MCC3000MT, Service Manual

Page: 49 / 194

2-10. CN-3550 Board
Preparation
1. Remove the top cover. (Refer to “2-2. Top Cover” . )
2. Remove the main board assembly (for CAMERA A). (Refer to “2-6. Main Board Assembly (for CAMERA A)” . )
(in case of removing the CN-3550 board for CAMERA B)
Procedure
1. Remove the screw to detach the USB stopper.
2. Disconnect the CN-3550 board from the connector (CN700) on the AVP-18 board.
CN-3550 board
USB stopper
AVP-18 board
This illustration shows the removal of the CN-3550 board for CAMERA A.
The same method applies to the removal of the CN-3550 board for CAMERA B.
CN700
B3 x 6
3. Install the removed parts by reversing the steps of removal.
MCC-3000MT
2-17